View G084SN03V1_1576344.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

g084sn03 v1 rev. 1.0 1/26 g084sn03 v1 ( ) preliminary specifications (v ) final specifications module 8.4 inch color tft-lcd model name g084sn03 v1 customer date checked & approved by note: this specification is subject to change without notice. approved by date debbie chiu 2008/7/31 prepared by alex cheng 2008/7/31 general display business division / au optronics corporation provided by www.display-solution.com info@display-solution.com www..net
g084sn03 v1 rev. 1.0 2/26 g084sn03 v1 contents 1. operating precautions ........................... ................................................... ....... 4 2. general description ............................. ................................................... ......... 5 2.1 display characteristics ........................ ................................................... ........................... 5 2.2 optical characteristics ........................ ................................................... ............................ 6 3. functional block diagram ........................ ................................................... .... 9 4. absolute maximum ratings........................ ................................................... 10 4.1 absolute ratings of tft lcd module............. ................................................... .............. 10 4.2 absolute ratings of environment................ ................................................... .................. 10 5. electrical characteristics...................... ................................................... ...... 11 5.1 tft lcd module ................................. ................................................... ......................... 11 5.2 backlight unit ................................. ................................................... ............................... 13 6. signal characteristic........................... ................................................... ........ 15 6.1 pixel format image............................. ................................................... .......................... 15 6.2 signal description ............................. ................................................... ............................ 17 6.3 scanning direction............................. ................................................... ........................... 16 6.4 the input data format.......................... ................................................... ........................ 18 6.5 interface timing ............................... ................................................... ............................. 19 6.6 power on/off sequence .......................... ................................................... .................. 20 7. connector & pin assignment ...................... .................................................. 2 1 7.1 tft lcd module: lvds connector................. ................................................... ............. 21 7.2 backlight unit: lamp connector ................. ................................................... .................. 21 7.3 lamp connector pin assignment.................. ................................................... ................ 21 8. reliability test criteria....................... ................................................... ......... 22 9. mechanical characteristics ...................... ................................................... .. 23 9.1 lcm front view ................................. ................................................... ........................... 23 9.2 lcm rear view.................................. ................................................... ......................... 234 10. label and packaging............................ ................................................... ..... 25 10.1 shipping label (on the rear side of tft-lcd di splay) ............................................. ...... 25 10.2 carton package ................................ ................................................... .......................... 25 11 safety.......................................... ................................................... ................. 26 11.1 sharp edge requirements ....................... ................................................... ................... 26 11.2 materials..................................... ................................................... ................................. 26 11.3 capacitors .................................... ................................................... ............................... 26 11.4 national test lab requirement ................. ................................................... .................. 26 provided by www.display-solution.com www..net
g084sn03 v1 rev. 1.0 3/26 g084sn03 v1 record of revision version and date page old description new description 0.0 2008/1/3 all first edition 6 viewing angle 70/70/65/55(r/l/u/d) viewing angle 7 5/75/75/75(r/l/u/d) 0.1 2008/1/14 24 9.2 lcm rear view-connector illustration 5 weight 215 10 (typ.) weight 200 10 (typ.) 6 viewing angle 75/75/75/75(r/l/u/d) viewing angle 8 0/80/80/60(r/l/u/d) 6 color / chromaticity coordinates 6 response time 35ms response time 30ms 24 9.2 lcm rear view 0.2 2008/4/22 25 add shipping label picture 1.0 2008/7/31 6 white luminance: 220nit (typ.) white luminance: 25 0nit (typ.) 6 response time : rising 10(ms); failing 20 (ms) response time : rising 20(ms); failing 10 (ms) 6 viewing angle 70/70/65/55(r/l/u/d) viewing angle (r/l/u/d)80/80/80/60 typ. (r/l/u/d)70/70/65/50 min. 10 absolute maximum ratings format align 13 ircfl: 4.1(min.);5.1(max) fcfl: 50(min.);60(typ.);70(max.) vicfl(0c): 910(max.) vicfl(25c): 700(max.) vcfl: 441(min.);490(typ.);539(max.) pcfl: 1.81(min.);2.25(typ.);2.75(max.) ircfl: 3.0(min.);7.0(max) fcfl: 40(min.);50(typ.);60(max.) vicfl(0c): 1150(max.) vicfl(25c): 890(max.) vcfl: 410(min.);460(typ.);530(max.) pcfl: 1.23(min.);2.12(typ.);3.71(max.) 13 ccfl lamp life: 10,000 hrs (min.) ccfl lamp life: 30,000 hrs (min.) 24 temperature humidity bias: 40 /90%,500 hours temperature humidity bias: 40 /90%,300 hours 27 shipping label: add china rohs mark provided by www.display-solution.com www..net
g084sn03 v1 rev. 1.0 4/26 g084sn03 v1 1. operating precautions 1) since front polarizer is easily damaged, please be cautious not to scratch it. 2) be sure to turn off power supply when inserting or disconnecting from input connector. 3) wipe off water drop immediately. long contact wi th water may cause discoloration or spots. 4) when the panel surface is soiled, wipe it with a bsorbent cotton or soft cloth. 5) since the panel is made of glass, it may be brok en or cracked if dropped or bumped on hard surface. 6) since cmos lsi is used in this module, take care of static electricity and insure human earth when handling. 7) do not open nor modify the module assembly. 8) do not press the reflector sheet at the back of the module to any direction. 9) in case if a module has to be put back into the packing container slot after it was taken out from the container, do not press the center of the ccfl reflector edge. instead, press at the far ends of the cfl reflector edge sof tly. otherwise the tft module may be damaged. 10) at the insertion or removal of the signal inte rface connector, be sure not to rotate nor tilt the interface connector of the tft module. 11) after installation of the tft module into an en closure (notebook pc bezel, for example), do not twist nor bend the tft module even momentary. at designing the enclosure, it should be taken into consideration th at no bending/twisting forces are applied to the tft module from outside. otherwise the tft module may be damaged. 12) cold cathode fluorescent lamp in lcd contains a small amount of mercury. please follow local ordinances or regulations for disposal. 13) small amount of materials having no flammabili ty grade is used in the lcd module. the lcd module should be supplied by power complied wit h requirements of limited power source (iec60950 or ul1950), or be applied exemptio n. 14) the lcd module is designed so that the cfl in it is supplied by limited current circuit (iec60950 or ul1950). do not connect the cfl in haz ardous voltage circuit. 15) severe temperature condition may result in dif ferent luminance, response time and lamp ignition voltage. 16) continuous operating tft-lcd display under low temperature environment may accelerate lamp exhaustion and reduce luminance dramatically. 17) the data on this specification sheet is applic able when lcd module is placed in landscape position. 18) continuous displaying fixed pattern may induce image sticking. it is recommended to use screen saver or shuffle content periodically if fix ed pattern is displayed on the screen. provided by www.display-solution.com www..net
g084sn03 v1 rev. 1.0 5/26 g084sn03 v1 2. general description this specification applies to the 8.4 inch color tf t lcd module g084sn03 v1. this module is designed for display units for indus trial applications. the screen format is intended to support the svga ( 800(h) x 600(v)) screen and 16.2m (rgb 8-bits) or 262k colors (rgb 6-bits). all input signals are lvds interface compatible. the module does not contain an inverter card for ba cklight. this is a rohs product. 2.1 display characteristics the following items are characteristics summary on the table under 25 condition: items unit specifications screen diagonal [inch] 8.4 ( 213.4mm ) active area [mm] 170.4(h) x 127.8(v) pixels h x v 800x3(rgb) x 600 pixel pitch [mm] 0.213x 0.213 pixel arrangement r.g.b. vertical stripe display mode tn, normally white nominal input voltage vdd [volt] 3.3 typ. typical power consumption [watt] 3.3 typ. weight [grams] 200 (typ.) physical size [mm] 203.0(w) x 142.5(h) x 5.7(d) (typ.) electrical interface 1 channel lvds surface treatment anti-glare, hardness 3h support color 262k(6-bit) / 16.2m(8-bit) temperature range operating storage (non-operating) [ o c] [ o c] -30 to +85 (panel surface temperature) -30 to +85 rohs compliance rohs compliance provided by www.display-solution.com www..net
g084sn03 v1 rev. 1.0 6/26 g084sn03 v1 2.2 optical characteristics the optical characteristics are measured under stab le conditions at 25 (room temperature): item unit conditions min. typ. max. note white luminance [cd/m2] ircfl= 4.6ma (center point) 200 250 - 1 uniformity % 9 points 70 75 - 1, 2, 3 contrast ratio 400 600 - 4 [msec] rising - 20 30 [msec] falling - 10 20 response time [msec] raising + falling - 30 50 5 [degree] [degree] horizontal (right) cr R 10 (left) 70 70 80 80 - - viewing angle [degree] [degree] vertical (upper) cr R 10 (lower) 65 50 80 60 - - 6 red x 0.54 0.57 0.60 red y 0.29 0.32 0.35 green x 0.28 0.31 0.34 green y 0.52 0.55 0.58 blue x 0.12 0.15 0.18 blue y 0.10 0.13 0.16 white x 0.28 0.31 0.34 color / chromaticity coordinates (cie 1931) white y 0.30 0.33 0.36 color gamut % 45 - note 1: measurement method equipment : pattern generator, power supply, digita l voltmeter, luminance meter (sr_3 or equivalent) aperture 1 with 50cm viewing distance test point center environment < 1 lux lcd module sr_3 or equivalent measuring distance module driving equipment provided by www.display-solution.com www..net
g084sn03 v1 rev. 1.0 7/26 g084sn03 v1 note 2: definition of 9 points position (display ac tive area : 170.4(h) x 127.8(v)) note 3: the luminance uniformity of 9 points is def ined by dividing the minimum luminance value by the maximum test point luminance. note 4 definition of contrast ratio (cr): note 5: definition of response time: the output signals of photo detector are measured w hen the input signals are changed from ?white? to ? black? (falling time) and from ?black? to ?white? (rising time), respectively. the response time interval is between 10% and 90% of amplitudes. please refer to the figure as be low. note 6: definition of viewing angle viewing angle is the measurement of contrast ratio 10, at the screen center, over a 180 horizontal an d 180 R minimum brightnes s of nine poin ts w9 = m aximum brightness of nine points contrast ratio (cr)= brightness on the ?white? state br ightness on the ?black? state 100 90 10 0 % optical response white black white tf tr 90 10 0 optical response white black white tr 50 % 90 % 90 % 50 % 10 % 10 % provided by www.display-solution.com www..net
g084sn03 v1 rev. 1.0 8/26 g084sn03 v1 vertical range (off-normal viewing angles). the 180 viewing angle range is broken down as below: 90 ( ) horizontal left and right, and 90 ( ) vertical high (up) and low (down). the measuremen t direction is typically perpendicular to the display surface with the scree n rotated to its center to develop the desired measurement viewing angle. provided by www.display-solution.com www..net
g084sn03 v1 rev. 1.0 9/26 g084sn03 v1 3. functional block diagram the following diagram shows the functional block of the 8.4 inch color tft/lcd module: gamma correction generation circuit dc/dc converter connecter d d c c p p o o w w e e r r l l v v d d s s tft-lcd 800*(3)*600 pixels gate driver ic source driver ic panel controller lvds receiver 1 ccfl inverter d d c c p p o o w w e e r r provided by www.display-solution.com www..net
g084sn03 v1 rev. 1.0 10/26 g084sn03 v1 4. absolute maximum ratings 4.1 absolute ratings of tft lcd module item symbol min max unit conditions logic/lcd drive voltage v dd - 0.3 + 3.6 [volt] 4.2 absolute ratings of environment item symbol min max unit operating temperature top -30 +85 [ o c] operation humidity hop 5 90 [%rh] storage temperature tst -30 +85 [ o c] storage humidity hst 5 90 [%rh] note: maximum wet-bulb should be 39 and no condensa tion. provided by www.display-solution.com www..net
g084sn03 v1 rev. 1.0 11/26 g084sn03 v1 5. electrical characteristics 5.1 tft lcd module 5.1.1 power specification symbol parameter min typ max units remark vdd logic/lcd drive voltage 3.0 3.3 3.6 [volt] 10% idd vdd current - 300 330 [ma] 64 gray bar pattern (vdd=3.3v, at 60hz) i rush lcd inrush current - - 3 [a] note 1 pdd vdd power - 1 1.2 [watt] 64 gray bar pattern (vdd=3.3v, at 60hz) note 1: measurement condition: q3 ao6402 g d2 s d1 d5 d6 q3 ao6402 g d2 s d1 d5 d6 c1 1uf/16v c2 1uf/25v c3 0.01uf/25v f1 vr1 47k +12.0v vcc sw1 sw mag-spst 1 2 (high to low) control signal (lcd module input) r2 1k +3.3v r1 47k r2 1k 90% 10% vdd rising time 0v 3.3v 470 us vdd 64 gray pattern provided by www.display-solution.com www..net
g084sn03 v1 rev. 1.0 12/26 g084sn03 v1 5.1.2 signal electrical characteristics input signals shall be low or hi-z state when vdd i s off. note: lvds signal waveform. symbol item min. typ. max. unit remark vth differential input high threshold - - 100 [mv] vicm=1.2v vtl differential input low threshold -100 - - [mv] vicm=1.2v vid input differential voltage 100 400 600 [mv] vicm differential input common mode voltage 1.1 1.6 [v] vth/vtl= 100mv vicm provided by www.display-solution.com www..net
g084sn03 v1 rev. 1.0 13/26 g084sn03 v1 5.2 backlight unit 5.2.1 parameter guideline for ccfl following characteristics are measured under a stab le condition using an inverter at 25 (room temperat ure): symbol parameter min. typ. max. unit remark ircfl ccfl operation range 3.0 4.6 7.0 [ma] rms (ta=25 o c) note 1 fcfl ccfl frequency 40 50 60 [khz] (ta=25 o c) note 2 vicfl (0 o c) (reference) ccfl ignition voltage - - 1150 [volt] rms (ta= 0 o c) vicfl (25 o c) (reference) ccfl ignition voltage - - 890 [volt] rms (ta=25 o c) vcfl ccfl discharge voltage 410 460 530 [volt] rms (ta=25 o c) note 3 ircfl=4.6ma vcfl = typ10% pcfl ccfl power consumption (inverter excluded) 1.23 2.12 3.71 [watt] (ta=25 o c) note 3 ircfl=4.6ma lamp life 30,000 - - hrs (ta=25 o c) note 4 ircfl =4.6ma note 1: ircfl is defined as the return current of a n inverter. (in figure. 1) (figure. 1: measurement of return current) a stable ircfl is a current without flicker or bia sing waveform provided by inverter that ensures the backlight perform to its specification. the ideal s ine waveform should be symmetric in positive and ne gative polarities and the asymmetry rate of the inverter w aveform should be below 10%. (note) ip: positive peak value i-p: negative peak value irms: effective value ip i-p r eference dc bias = (| ip ? i-p| / irms ) x 100 % <10% inverter lamp hi lo ma + - provided by www.display-solution.com www..net
g084sn03 v1 rev. 1.0 14/26 g084sn03 v1 crest factor = ip or (i-p) / irms should have the range within 1.414 + 10% it is recommended to use the inverter with detecti on circuit ( ie: balance and protection circuit) to avoid overvoltage, overcurrent, or mismatching waveform. note 2: ccfl frequency should be carefully determin ed to avoid interference between inverter and tft l cd. higher frequency will induce higher leakage current and fu rther impact lamp life. note 3: calculation value for reference (ircflxvcfl x1=pcfl). note 4: the definition of lamp life means when any of following conditions happen: a) luminance falls to 50% or less of the initial v alue. b) normal lighting is no more available. (flickerx ing, pink lighting, no lighting, etc.) c) lamp voltage or lighting start voltage exceeds the specified value. lamp life time shortens according to a) placing methodology: mercury is unevenly distrib uted in portrait mounting. b) environmental condition: low temperature reduces the presence of mercury vapor, which results in approximately lamp life of 1,000 hours. c) ccfl surface temperature: presence of gradient i n lamp surface temperature causes uneven mercury migration. d) inverter design: its resonance capacitor should be fine-tuned with the impedance of ccfl. e) over driving current (> 5 ma) shortens lamp life time dramatically. note 5: the display is with dual lamp design, and t he ccfl current in above table refers to each lamp. provided by www.display-solution.com www..net
g084sn03 v1 rev. 1.0 15/26 g084sn03 v1 6. signal characteristic 6.1 pixel format image following figure shows the relationship between inp ut signal and lcd pixel format. r g b r g b r g b r g b r g b r g b r g b r g b 1 2 799 800 1st line 600th line provided by www.display-solution.com www..net
g084sn03 v1 rev. 1.0 16/26 g084sn03 v1 6.3 signal description lvds is a differential signal technology for lcd in terface and high speed data transfer device. the co nnector pin definition is as below. pin no. symbol description 1 vdd power supply, 3.3v (typical) 2 vdd power supply, 3.3v (typical) 3 ud vertical reverse scan control, low or nc normal mode. high vertical reverse scan. note 4 lr vertical reverse scan control, low or nc normal mode. high horizontal reverse scan. note 5 rxin1- 6 rxin1+ lvds differential data input pair 0 7 gnd ground 8 rxin2- 9 rxin2+ lvds differential data input pair 1 10 gnd ground 11 rxin3- 12 rxin3+ lvds differential data input pair 2 13 gnd ground 14 rxclkin- 15 rxclkin+ lvds differential clock input pair 16 gnd ground 17 sel 68 lvds 6/8 bit select function control, low or nc 6 bit input mode. high 8 bit input mode. note 18 nc nc 19 rxin4- 20 rxin4+ lvds differential data input pair 3. must be tied t o ground in 6 bit input mode. note : ?low? stands for 0v. ?high? stands for 3.3v . ?nc? stands for ?no connected.? provided by www.display-solution.com www..net
g084sn03 v1 rev. 1.0 17/26 g084sn03 v1 6.3 scanning direction the following figures show the image seen from the front view. the arrow indicates the direction of sc an. fig. 1 fig. 2 fig. 3 fig. 4 fig. 1 normal scan (pin3, ud = low or nc ; pin4, rl = low or nc) fig. 2 reverse scan (pin3, ud = low or nc ; pin4, r l = high) fig. 3 reverse scan (pin3, ud = high ; pin4, rl = l ow or nc) fig. 4 reverse scan (pin3, ud = high ; pin4, rl = h igh) provided by www.display-solution.com www..net
g084sn03 v1 rev. 1.0 18/26 g084sn03 v1 6.4 the input data format 6.4.1 sel68 sel68 = ?low? or ?nc? for 6 bits lvds input g0 r5 r4 r3 r2 r1 r0 de vs hs b5 b4 b3 b2 b1 b0 g5 g4 g3 g2 g1 rxclkin rxin1 rxin2 rxin3 sel68 = ?high? for 8 bits lvds input g0 r5 r4 r3 r2 r1 r0 rsv b7 b6 g7 g6 r7 r6 de vs hs b5 b4 b3 b2 b1 b0 g5 g4 g3 g2 g1 rxclkin rxin1 rxin2 rxin3 rxin4 note1 : please follow pswg. note2 : r/g/b data 7:msb, r/g/b data 0:lsb signal name description remark r7 r6 r5 r4 r3 r2 r1 r0 red data 7 (msb) red data 6 red data 5 red data 4 red data 3 red data 2 red data 1 red data 0 (lsb) red-pixel data each red pixel?s brightness data consists of these 8 bits pixel data. g7 g6 g5 g4 g3 g2 g1 g0 green data 7 (msb) greendata 6 greendata 5 greendata 4 greendata 3 greendata 2 greendata 1 greendata 0 (lsb) green-pixel data each green pixel?s brightness data consists of thes e 8 bits pixel data. b7 b6 b5 b4 b3 b2 b1 b0 blue data 7 (msb) blue data 6 blue data 5 blue data 4 blue data 3 blue data 2 blue data 1 blue data 0 (lsb) blue-pixel data each blue pixel?s brightness data consists of these 8 bits pixel data. rxclkin+ rxclkin- lvds clock input de display enable vs vertical sync hs horizontal sync note: output signals from any system shall be low o r hi-z state when vdd is off. provided by www.display-solution.com www..net
g084sn03 v1 rev. 1.0 19/26 g084sn03 v1 6.5 interface timing 6.5.1 timing characteristics de mode only parameter symbol min. typ. max. unit condition clock frequency 1/ t clock 33.6 39.8 48.3 mhz period t v 608 628 650 active t vd 600 600 600 vertical section blanking t vb 8 28 50 t h period t h 920 1056 1240 active t hd 800 800 800 horizontal section blanking t hb 120 256 440 t clock note: frame rate is 60 hz. note: de mode. 6.5.2 input timing diagram provided by www.display-solution.com www..net
g084sn03 v1 rev. 1.0 20/26 g084sn03 v1 6.6 power on/off sequence vdd power and lamp on/off sequence is as below. int erface signals are also shown in the chart. signals from any system shall be hi-z state or low level when vdd is off. power on/off sequence timing value parameter min. typ. max. units t1 0.5 - 10 ms t2 0 40 50 ms t3 200 - - ms t4 200 - - ms t5 0 16 50 ms t6 0 - 10 ms t7 1000 - - ms the above on/off sequence should be applied to avoi d abnormal function in the display. please make sur e to turn off the power when you plug the cable into the input co nnector or pull the cable out of the connector. t7 t 5 t2 t3 valid data t1 10% 90% 10% 90% t4 t 6 power supply vdd lvds signal backlight on provided by www.display-solution.com www..net
g084sn03 v1 rev. 1.0 21/26 g084sn03 v1 7. connector & pin assignment physical interface is described as for the connecto r on module. these connectors are capable of accomm odating the following signals and will be following compone nts. 7.1 tft lcd module: lvds connector connector name / designation signal connector manufacturer stm connector model number msb24013p20 or compatible. adaptable plug p24013p20 pin no. signal name pin no. signal name 1 vdd 2 vdd 3 ud 4 lr 5 rxin1- 6 rxin1+ 7 gnd 8 rxin2- 9 rxin2+ 10 gnd 11 rxin3- 12 rxin3+ 13 gnd 14 rxckin- 15 rxckin+ 16 gnd 17 sel 68 18 nc 19 rxin4- 20 rxin4+ 7.2 backlight unit: lamp connector connector name / designation lamp connector manufacturer jst connector model number bhsr-02vs-1 mating model number sm02b-bhss-1-tb 7.3 lamp connector pin assignment pin# symbol cable color signal name 1 1 pink high voltage 2 2 white low voltage cable length: 60 5 mm connector-output position: right side (front view) lamp assembly design shall be easy for replacement and repair. provided by www.display-solution.com www..net
g084sn03 v1 rev. 1.0 22/26 g084sn03 v1 8. reliability test criteria items required condition note temperature humidity bias 40 / 90%,300 hours high temperature operation 85 ,300 hours low temperature operation -30 ,300 hours hot storage 85 ,300 hours cold storage -30 ,300 hours thermal shock test -20 /30 min ,60 /30 min ,100cycles shock test (non-operating) 50g,20ms,half-sine wave,( x, y, z) vibration test (non-operating) 1.5g, (10~200hz, p-p) 30 mins/axis (x, y, z) on/off test on/10 sec, off/10 sec, 30,000 cycles esd contact discharge: 8kv, 150pf(330 ) 1sec, 8 points, 25 times/ point air discharge: 15kv, 150pf(330 ) 1sec, 8 points, 25 times/ point note 1 note1: according to en61000-4-2, esd class b: s ome performance degradation allowed. no data lost . self-recoverable. no hardware failures. provided by www.display-solution.com www..net
g084sn03 v1 rev. 1.0 23/26 g084sn03 v1 9. mechanical characteristics 9.1 lcm front view provided by www.display-solution.com www..net
g084sn03 v1 rev. 1.0 24/26 g084sn03 v1 9.2 lcm rear view provided by www.display-solution.com www..net
g084sn03 v1 rev. 1.0 25/26 g084sn03 v1 10. label and packaging 10.1 shipping label (on the rear side of tft-lcd display) 10.2 carton package 1 . m a x. c a p a city : 30 l c d m o d u le s/c a rto n . n o t e : 2 . m a x. w e ig h t : 1 2 k g /c a rto n. 3 . m e a s : 6 0 0 m m *3 5 3m m *2 10 m m . a n ti-s tatic b ag l c d m o du le e p p c u sh ion c a rton manufactured xx/xx model no: g084sn03 v.1 au optronics made in china (s1) provided by www.display-solution.com www..net
g084sn03 v1 rev. 1.0 26/26 g084sn03 v1 11 safety 11.1 sharp edge requirements there will be no sharp edges or corners on the disp lay assembly that could cause injury. 11.2 materials 11.2.1 toxicity there will be no carcinogenic materials used anywhe re in the display module. if toxic materials are used, they will be reviewed and approved by the res ponsible auo toxicologist. 11.2.2 flammability all components including electrical components that do not meet the flammability grade ul94-v1 in the module will complete the flammability rating except ion approval process. the prxinted circuit board will be made from materi al rated 94-v1 or better. the actual ul flammability rating will be prxinted on the prxinte d circuit board. 11.3 capacitors if any polarized capacitors are used in the display assembly, provisions will be made to keep them fro m being inserted backwards. 11.4 national test lab requirement the display module will satisfy all requirements fo r compliance to: ul 1950, first edition u.s.a. information technology equipment provided by www.display-solution.com www..net

▲Up To Search▲

Price & Availability of G084SN03V1

	To Download G084SN03V1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .